Engineering > Manual > Lab 03 ARMv8 Control Instructions Review Test Submission

Lab 03 ARMv8 Control Instructions Review Test Submission

Review Test Submission: Lab 03: ARMv8 Control Instructions User Jacob Geller Course 17 SPRING ECEN 350 200,501-511: COMPUTER ARCH & DESIGN Test Lab 03: ARMv8 Control Instructions Started 2/13/17 11:00 AM Submitted 2/13/17 11:03 AM Due Date 2/15/17 11:59 PM Status Completed Att ... empt 80 out of 80 points Score Time 3 minutes Elapsed Instructions Objective The objective of this lab is to make you comfortable with ARMv8 control instructions by writing, running, and debugging several complex programs. Pre-requisite Before starting with this lab, you should be familiar with ARMv8 control instructions as well as DS-5. Be sure to review the prelab, and book sections 2.7, 2.8 and 2.10. Setup As with lab01 and lab02, checkout the lab03 starting files from the class git repo. Make sure they build and run cleanly before starting the lab. Results Displayed All Answers, Submitted Answers, Feedback Question 1 10 out of 10 points Replace the existing test.S code with the following assembly: .globl test test: MOVZ X1, #10 ADD X0, XZR, XZR [Show More]